Product Categories

Stock

Airpot stock self-aligning pneumatic actuators offer designers self-aligning rod capability along with extreme low friction and precise control of movement and force. This product group makes possible accurate force actuation and uniform motion with slow, smooth movement, even over distances less than 0.01 inch, or cycle rates at very high speeds up to 10 cps or more. There are a variety of rod connection choices available for easy, low friction mounting and alignment. The Airpot® self-aligning Pneumatic Actuator is the most compact of the Actuator line. It offers 6 bore sizes ranging from .22” to 1.75”, the lowest mass of all Airpot actuators and uses low friction ball joints at both the piston and rod ends to allow the piston to self-align and reduce side loads.

Click here to see a comparison of Stock vs. Custom Actuators.

MODEL
2KS56P - Bore Size: .220" (5.59 mm)
VIEW PRODUCT GROUP
2KS95P -Bore Size: .366" (9.3 mm)
VIEW PRODUCT GROUP
2KS160P -Bore Size: .627" (15.93 mm)
VIEW PRODUCT GROUP
2KS240P - Bore Size: .945" (24 mm)
VIEW PRODUCT GROUP
2KS325P - Bore Size: 1.281" (32.5 mm)
VIEW PRODUCT GROUP
2KS444P - Bore Size: 1.750" (44.4 mm)
VIEW PRODUCT GROUP
BORE (inches) 0.22 0.366 0.627 0.945 1.281 1.75
PISTON AREA (sq. inches) 0.038 0.105 0.309 0.701 1.289 2.405
PRESSURE RANGE: FULL VACUUM TO (PSI) 125 100 100 100 100 100
FORCE OUTPUT AT MAX PRESSURE (lbs) 4.75 10.5 30.9 70.1 128.8 240.1
*Max Leak Rate SL/min AT REFERENCE PRESSURE= .190 65 .36 50 .74 50 1.06 50 2.12 50 3.6 50
MIN PRESSURE DIFFERENTIAL REQD FOR ACTUATION (PSI) 0.05 0.05 0.05 0.05 0.05 0.05
*Max Leak Rate SL/min AT REFERENCE PRESSURE= .570 125 1.17 100 2.78 100 5.60 100 9.6 100 15.0 100
FRICTION COEFFICIENT (approx.) Static and dynamic 0.2 0.2 0.2 0.2 0.2 0.2
PISTON FRICTION AS % OF LOAD (without side load) .5% - 1.5% .5% - 1.5% .5% - 1.5% .5% - 1.5% .5% - 1.5% .5% - 1.5%
OPERATING TEMPERATURE RANGE *NOTE: If operating at temperatures over 70 degrees C (158 degrees F) please advise factory -55C to +150C -55C to +150C -55C to +150C -55C to +150C -55C to +150C -55C to +150C
COMPONENT WEIGHT: Fixed mass in grams (cylinder, bottom, etc.) =(C1 x Stroke) + C2
C1 = 1.2 C2 = 6.4
C1 = 2.9 C2 = 8.9
C1 = 6.1 C2 = 13.6
C1 = 11.5 C2 = 40.6
C1 = 17.5 C2 = 60.3
C1 = 25.7 C2 = 82.1
COMPONENT WEIGHT: Movable mass in grams (piston and rod) =(C3 x Stroke) + C4
C3 = .2 C4 = 1.4
C3 = .4 C4 = 2.8
C3 = .4 C4 = 4.3
C3 = 1.3 C4 = 8.3
C3 = 6.3 C4 = 13.6
C3 = 6.3 C4 = 31.6

* Lower leak rates may be available upon request.

For more information on our pneumatic actuation products, Contact Us Today!

Our experienced staff will provide you with the solution your project requires.

Contact Us